Contact us for more information

or Call (941) 244-0935

Increase fiber density by three times without the use of proprietary and patented cassettes and enclosures by using commercial off-the-shelf and existing enclosures, panels, and cassettes.

Features:

Insertion and Removal via a push-pull strain relief boot
Reversible polarity without exposing fibers, and without the use of a tool
Meets IEC 61735-1 Grade B optical performance
Optional component for multiple jumper insertion and removal from ports
Uniboot design, terminates on 2.0mm micro cable
Multimode and Single-mode UPC & APC options
GR-326 and TIA-568 compliant

1.25mm Ferrule Technology

The MDC is a two-fiber connector manufactured with proven 1.25mm ferrule technology used in industry-standard LC connectors.

Factor of Three

Three port MDC adapters fit directly into standard panel openings for duplex LC adapters, increasing fiber density by a factor of three.

Simple Push or Pull

Insertion and extraction of the MDC connector occurs with a simple push or pull on a flexible and robust strain relief boot providing functional density in very tight spaces.

Exceeds GR-326

The MDC connector is designed for optimal stability exceeding the requirements of Telcordia GR-326 for carrier or data center applications.

MDC connector is a Very Small Form Factor (VSFF) duplex optical connector designed for termination of single-mode and multimode fiber cables up to 2.0mm in diameter. It is a 2 fiber connector using proven 1.25mm LC ferrules, providing 3x density over LC. Adapters use the same port cut outs and sizes as LC, allowing current designs to transfer from LC to MDC. MDC solutions include uniboot style jumpers, harnesses, trunks, panels, and many pre-terminated MTP options.

Quick and Simple Polarity Reversal

Separate connector housing from boot

Rotate 180 degrees

Re-attach boot to connector housing

The polarity reversal of the MDC connector is effortless and does not expose or twist delicate fibers during the process. The polarity can be reversed on-site by pulling the boot from the connector housing, rotating the boot to 180 degrees, and re-assemble the boot assembly back onto the connector housing. Polarity marks on the top and side of the connector and the MDC logo provide notification of reversed connector polarity.The polarity reversal of the MDC connector is effortless and does not expose or twist delicate fibers during the process. The polarity can be reversed on-site by pulling the boot from the connector housing, rotating the boot to 180 degrees, and re-assemble the boot assembly back onto the connector housing. Polarity marks on the top and side of the connector and the MDC logo provide notification of reversed connector polarity.

MDC2
MDC 2-port adapter

MDC3
MDC 3-port adapter

MDC4
MDC 4-port adapter

MDC6
MDC 6-port adapter

MDC Adapters

The 2-port and 3-port adapters are designed to fit through the same panel cutout defined for duplex LC adapters, allowing an instant 2x or 3x of the current module/panel connector density by simply removing the LC duplex adapters and isntalling the MDC adapters.

MDC Adapter Panels & MTP^® Modules

Panels use an MDC adapter to accept a jumper or pre-terminated trunk on each side of the panel, up to 48 fiber per Classic panel.

Modules use a denser MDC adapter to achieve higher fiber counts over panels. A standard Classic MDC module provides 72 fibers, using 12 MDC adapter ports at 6 fibers each, with 6 MTP<sup>®</sup> ports on the back. Standard modules use pinned (male) MTP<sup>®</sup> connectors, and should be mated with non-pinned (female) trunk cables.

MDC Cassette

Pre-terminated MTP^® modules provide a low loss transition from trunk cables to duplex patch cords. All modules are manufactured using enhanced optical fiber and low loss connectors.

Secure Solutions
MDC Cassette

DMSI offers Secure Solutions Color Coded & Non-Keyed for a more secured data transmission
through an optical cable.

OMNIA-RA Enclosures

Classic 1U 144 Fiber

2 Classic cassettes

up to 144 fibers

3x fiber density of LC duplex adapters

Lightweight

Easily slide in and out

PRM 1U 288 Fiber

4 PRM cassettes

up to 288 fibers

3x fiber density of LC duplex adapters

Lightweight

Easily slide in and out

MDC
Patch Cords

DMSI offers a range of MDC to MDC patch cords in single-mode UPC and APC, and multimode options. MDC to ELiMENT™ duplex LC uniboot patch cords are also available.

MDC Multi-Fiber
Trunks

For more fiber needs, DMSI offers multi-fiber trunks in MDC to MDC and MDC to ELiMENT™ duplex LC uniboot up to 288 fiber.

MDC-MTP^®
Breakout Cables

MDC to MTP^® Pro brekout cables are available for up to 288 fiber.

Pre-Terminated
Shelf

This is a cost effective pre-terminated MTP^® solution for quick deployments. Enclosure is preterminated with MTP^® pinned connectors in the back and MDC connectors on the front.

MDC
Module Jacks

MDC2 KMJ color coded and non-keyed solution for MDC2 connectors can hold 4 fibers per adapter. All MDC2 module jacks are assembled with color coded adapters and bezels.

Contact us for more information

or Call (941) 244-0935

Contact us for more information

or Call (941) 244-0935

Increase fiber density by three times without the use of proprietary and patented cassettes and enclosures by using commercial off-the-shelf and existing enclosures, panels, and cassettes.